Proudly serving the Western Slope of CO including Grand Junction, Glenwood Springs, Montrose & nearby
Concrete is a heavy material and so are the vehicles, machinery and structures that concrete slabs and footings are expected to support.
Sometimes, the combined weight of concrete and what it supports causes concrete settlement to occur. The soil beneath the concrete compresses, and can cause major problems in Austin, Steamboat Springs, Glenwood Springs, Carbondale, Craig, Delta, Clifton and the surrounding areas.
Commercially, concrete roadways can become dangerous or unusable. This often results in sections of runways and parking lots being closed down. In the example of trains, train service can be interrupted because of erosion and settlement beneath the track bed.
This can cause problems at your home as well. Uneven sidewalks, walkways and steps can cause tripping, and sunken driveway slabs can make parking your car in the garage quite a challenge. PolyLevel® is designed specifically to repair this type of problem.
In the past, contractors often raised settled concrete by pumping a liquid mortar beneath the settled section (called mud jacking). But this pumping process is hard to control, and the added mass of the mortar puts even more weight on the soil.
Fortunately, foundation and concrete repair specialists now have a new technique that's more effective at raising settled concrete. Polymer injection harnesses the expansive force of a structural grade geopolymer to provide fast concrete leveling, fill voids in soil and strengthen soil that has poor load-bearing qualities.
The polymer consists of two separate liquids that are combined right at the injection nozzle to trigger a chemical reaction that turns the blended ingredients into expanding, high-density foam. The foam flows into voids and between loose soil particles, expanding to about 15 times its initial volume. This expansive action effectively lifts settled concrete. An experienced technician, like those at Foundation Repair of Western Colorado, can control the application to create just the right amount of raising pressure.
The polymer begins to harden quickly after doing its raising work. Within just 30 minutes, it reaches 90% of its final strength, enabling damaged concrete roads and slabs to be put back into service right away. The speed of polymer injection repairs is another huge advantage over mortar pumping.
In addition to lifting and realigning settled and/or shifted concrete, polymer injection can be done prior to construction to improve soil stability and strength. Injections as deep as 20ft.-30ft. are possible.
Ready to see why PolyLevel® is the superior choice when it comes to repairing sinking concrete in Greater Grand Junction? Get started by calling Foundation Repair of Western Colorado at 1-800-741-5952 or contact us online to meet with one of our specialists today! We provide written estimates for concrete repair in Grand Junction, Montrose, Delta, Aspen, Glenwood Springs and throughout the surrounding area.